氧化铈-二氧化硅介孔材料制备及对铜离子的吸附性能

采用共沉淀法和沉淀浸渍法制备了纳米氧化铈-二氧化硅（CeO₂-SiO₂）介孔材料吸附剂,主要考察了其对水中铜离子（Cu²⁺）的吸附行为。通过X射线衍射（XRD）、扫描电镜（SEM）和氮吸附（BET）等手段对合成的介孔材料进行了性能表征,并通过静态吸附实验分析了溶液pH、溶液初始金属离子质量浓度、吸附剂用量、吸附时间等条件对介孔材料吸附Cu²⁺性能的影响。结果表明：共沉淀法制备的纳米CeO₂-SiO₂介孔材料对Cu²⁺的去除效果较沉淀浸渍法要好;当溶液pH=7.0时CeO₂-SiO₂介孔材料对Cu²⁺的吸附效果最好,20 min时基本达到吸附平衡;溶液初始Cu²⁺浓度增大Cu²⁺去除率降低,Cu²⁺累计吸附量增大;随着吸附剂用量增加Cu²⁺去除率增大,当CeO₂-SiO₂吸附剂用量为0.15 g/L时对Cu²⁺的去除率趋于稳定;CeO₂-SiO₂吸附剂对不同金属离子吸附性能由大到小的顺序为Cu²⁺、Fe²⁺、Mn²⁺,该吸附过程均符合准二级动力学模型。     

CO2驱沥青质沉积对致密储层的伤害机理——以鄂尔多斯盆地延长组长8储层为例

为了揭示CO2驱替过程中沥青质沉积对致密储层的伤害机理,文中基于岩心核磁共振T2谱测试原理,开展了CO2注入压力下的岩心驱替实验,研究了沥青质在岩心中的沉积特征,评价了沥青质沉积对储层的伤害程度。实验结果表明:沥青质沉积量和渗透率伤害率随着CO2注入压力的升高呈现先快速上升后趋于平缓的趋势;在CO2注入过程中,沥青质主要沉积在弛豫时间大于10 ms的大、中孔隙,导致大、中孔隙占比下降,微细、小孔隙占比增加,且随着CO2注入压力的升高,大、中孔隙占比下降幅度增大,微细、小孔隙占比上升幅度增大;此外,沥青质沉积会引起润湿性发生反转,随着沥青质沉积量的增加,润湿反转指数增大,岩心润湿性不断向强油湿方向转变。     

Electron Paramagnetic Resonance and Magnetic Circular Dichroism Spectra of the Nitrogenase M Cluster Precursor Suggest Sulfur Migration upon Oxidation: A Proposal for Substrate and Inhibitor Binding

The active site of the nitrogen-fixing enzyme Mo-nitrogenase is the M cluster ([MoFe₇S₉C ⋅ R-homocitrate]), also known as the FeMo cofactor or FeMoco. The biosynthesis of this highly complex metallocluster involves a series of proteins. Among them, NifB, a radical-SAM enzyme, is instrumental in the assembly of the L cluster ([Fe₈S₉C]), a precursor and all-iron core of the M cluster. In the absence of sulfite, NifB assembles a precursor form of the L cluster called the L* cluster ([Fe₈S₈C]), which lacks the final ninth sulfur. EPR and MCD spectroscopies are used to probe the electronic structures of the paramagnetic, oxidized forms of both the L and L* clusters, labeled L^Ox and [ L* ] ^Ox . This study shows that both L^Ox and [ L* ] ^Ox have nearly identical EPR and MCD spectra, thus suggesting that the two clusters have identical structures upon oxidation; in other words, a sulfur migrates away from L^Ox following oxidation, thereby rendering the cluster identical to [ L* ] ^Ox . It is proposed that a similar migration could occur to the M cluster upon oxidation, and that this is an instrumental part of both M cluster formation and nitrogenase substrate/inhibitor binding.     

Magnetic and antibacterial studies of sol-gel dip coated Ce doped TiO2 thin films: Influence of Ce contents

Ce-doped TiO₂ thin films were synthesized by sol-gel dip coating route to evaluate the effect of Ce doping percentage on properties of TiO₂. X-ray diffraction spectra revealed both anatase and brookite phases, and Ce doping favours the anatase–brookite transformation of TiO₂ films. The optical constants of the thin films were achieved by evaluating spectroscopic UV-VIS-NIR spectrophotometry data. The band gap of the Ce doped TiO₂ was reduced from ~3.93 eV to ~3.79 eV with an increase in Ce doping percentage. All films have shown ferromagnetic behaviors which increase with the increase in Ce content due to enhancement in the bound magnetic polaron. Higher Ce doping increases the oxygen vacancies and saturation magnetization. Boost magnetic properties stem from the generation of the interaction between the Ce ion and an oxygen vacancy. The study showed that the antimicrobial activity of Ce doped TiO₂ is ineffective. Hence doping of Ce can modify the properties of TiO₂ and are used in LEDs, magneto-optical devices and solar cells.     

基于拓扑单向波导的电磁诱导透明效应研究

为了研究电磁诱导透明效应在拓扑单向波导中的表现，设计了一种基于磁性光子晶体的耦合谐振腔波导。通过对谐振腔位置的调控实现了具有单向性质的电磁诱导透明效应，并利用有限时域差分仿真证明了电磁诱导透明效应在单向拓扑波导中的相关特性。该研究可为拓扑波导中实现光延迟、光开关等提供参考。     

[学科发展]深冷轧制制备高性能金属材料研究进展

相对于传统热轧、温轧、冷轧，深冷轧制是一项变革性技术，它利用某些金属材料在深冷情况下具有优异的塑性变形能力以及深冷环境阻碍塑性变形过程中位错运动和再结晶行为，促使材料晶粒细化，材料具有更高的强度与韧性。系统地介绍了近年来深冷轧制制备高性能金属材料的研究进展，包括深冷轧制在铝合金、铜合金、钛合金、复合层状金属带材中的应用。对深冷轧制制备高性能金属材料的研究进行了展望。     

煤制天然气中氢对X80钢螺旋焊管力学性能的影响

近年来,我国多项煤制天然气示范工程投入运行,X80钢螺旋焊管常用于天然气长输管道建设,其与煤制天然气的相容性直接影响了长输管道的服役寿命和安全可靠性。为研究煤制天然气对国产X80钢螺旋焊管的力学性能影响,分别从埋弧螺旋焊管的母材和螺旋焊缝处取样,在总压为12 MPa,氢气分数为0,1vol%,2.2vol%,5vol%的模拟环境中分别进行慢应变速率拉伸试验和疲劳裂纹扩展速率试验。试验结果表明:含氢量5vol%以下时,煤制天然气对国产X80管线钢强度性能影响很小,但对塑性性能有一定影响,对疲劳裂纹扩展性能影响很大,煤制天然气中氢对母材的疲劳裂纹扩展性能劣化影响比螺旋焊缝严重。     

Moisture transfer and stress development during high-temperature drying of Chinese fir

Abstract

The knowledge of moisture content (MC) and drying stress are crucial parameters to control the drying process and maintain the quality of dried wood. Herein, we investigated the pattern of moisture transfer and stress development in Chinese fir during the high-temperature drying process. The MC in each layer of lumber was separated into bound water and free water via nuclear magnetic resonance (NMR), and the drying and residual stress were measured using prong test method. There was different MC in each layer along the thickness, resulting in an MC gradient that initially increased and then decreased, which is consistent with the trend of drying stress. The T₂₁ peak indicating bound water shifted to the left especially when MC was below the fiber saturation point, signifying that the discharge of moisture became difficult with prolonged drying time. The ratio of bound water to free water was different in each layer, indicating that the moisture transfer was different along the thickness. Furthermore, the residual stress was greater than the corresponding drying stress though the disparity reduced gradually, which suggests that the MC gradient was the largest affecting factor for drying stress at high MC stages but decreased to some extent as the drying process continued.     

亲水性PET共混材料的制备及性能研究

以机械共混法制备亲水性聚对苯二甲酸乙二醇酯（PET）共混材料，并通过接触角测定仪、差示扫描量热仪(DSC)和电子万能材料试验机等对共混材料的亲水性能、热性能和力学性能等进行研究与分析。结果表明，亲水处理剂聚乙二醇（PEG）、聚丙烯酸钠（PAAS）、聚乙烯吡咯烷酮（PVP）均能改善PET的亲水性能，影响PET的结晶性能，但亲水处理剂对PET的力学性能影响较小，其中PET/PEG共混材料的亲水性最优；随着PEG含量的增加，PET/PEG共混材料的亲水性先逐渐增强，当PEG含量高于5 %后，共混材料的亲水性变化很小；且PET的结晶度随着PEG的加入呈现先增大后减小的趋势。     

Deposition-environment-dependent structural and magnetic property modification of [111]-oriented epitaxial CoFe2O4 films

We examined the magnetic, structural, and chemical properties of CoFe₂O₄ films deposited on Al₂O₃ substrates using RF-magnetron sputtering under Ar and Ar + O₂ environments. Perpendicular magnetic anisotropy with large magnetization was observed in the case of the film deposited under the Ar + O₂ environment. However, no significant anisotropy appeared in the film deposited under the Ar environment. Interestingly, depth-dependent X-ray photoelectron spectra showed nearly identical stoichiometric ratios of Co/Fe and oxygen vacancies regardless of the deposition environment. Structurally, high-quality crystallinity with in-plane compressive strain, and lower surface and interfacial roughness were induced in the film deposited under the Ar + O₂ environment. Cross-sectional transmission electron microscopy and X-ray reflectivity measurements showed that oxygen not only suppressed the deposition rate but also increased the electron density of the film, resulting in better crystallinity. Hence, the presence of oxygen during deposition should be considered as one of the essential parameters for improving the structural and magnetic properties of ferrite films.